--- a/aclocal.m4	Tue Nov 09 22:03:55 2004 +1100
+++ b/aclocal.m4	Tue Nov 09 22:35:58 2004 +1100
@@ -1,4 +1,4 @@
-# generated automatically by aclocal 1.8.3 -*- Autoconf -*-
+# generated automatically by aclocal 1.9.1 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
 # Free Software Foundation, Inc.
@@ -33,14 +33,14 @@
 # ----------------------------
 # Automake X.Y traces this macro to ensure aclocal.m4 has been
 # generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"])
+AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
 
 # AM_SET_CURRENT_AUTOMAKE_VERSION
 # -------------------------------
 # Call AM_AUTOMAKE_VERSION so it can be traced.
 # This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-	 [AM_AUTOMAKE_VERSION([1.8.3])])
+	 [AM_AUTOMAKE_VERSION([1.9.1])])
 
 # AM_AUX_DIR_EXPAND
 
@@ -108,7 +108,7 @@
 
 # AM_CONDITIONAL                                              -*- Autoconf -*-
 
-# Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
+# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -145,8 +145,8 @@
 fi
 AC_CONFIG_COMMANDS_PRE(
 [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.])
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
 fi])])
 
 # serial 7						-*- Autoconf -*-
@@ -266,9 +266,14 @@
        grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
       # icc doesn't choke on unknown options, it will just issue warnings
-      # (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored.
-      if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
         am_cv_$1_dependencies_compiler_type=$depmode
         break
       fi
@@ -314,7 +319,8 @@
 
 # Generate code to set up dependency tracking.   -*- Autoconf -*-
 
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
+#   Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -350,27 +356,21 @@
   else
     continue
   fi
-  grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue
-  # Extract the definition of DEP_FILES from the Makefile without
-  # running `make'.
+  # Extract the definition of DEPDIR, am__include, and am__quote
+  # from the Makefile without running `make'.
   DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
   test -z "$DEPDIR" && continue
+  am__include=`sed -n 's/^am__include = //p' < "$mf"`
+  test -z "am__include" && continue
+  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
   # When using ansi2knr, U may be empty or an underscore; expand it
   U=`sed -n 's/^U = //p' < "$mf"`
-  test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
-  # We invoke sed twice because it is the simplest approach to
-  # changing $(DEPDIR) to its actual value in the expansion.
-  for file in `sed -n '
-    /^DEP_FILES = .*\\\\$/ {
-      s/^DEP_FILES = //
-      :loop
-	s/\\\\$//
-	p
-	n
-	/\\\\$/ b loop
-      p
-    }
-    /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
+  # Find all dependency output files, they are included files with
+  # $(DEPDIR) in their names.  We invoke sed twice because it is the
+  # simplest approach to changing $(DEPDIR) to its actual value in the
+  # expansion.
+  for file in `sed -n "
+    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
        sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
     # Make sure the directory exists.
     test -f "$dirpart/$file" && continue
@@ -425,7 +425,7 @@
 # This macro actually does too much some checks are only needed if
 # your package does certain things.  But this isn't really a big deal.
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
 # Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
@@ -501,7 +501,6 @@
 AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
 AM_MISSING_PROG(AUTOHEADER, autoheader)
 AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_MISSING_PROG(AMTAR, tar)
 AM_PROG_INSTALL_SH
 AM_PROG_INSTALL_STRIP
 AC_REQUIRE([AM_PROG_MKDIR_P])dnl
@@ -510,7 +509,9 @@
 AC_REQUIRE([AC_PROG_AWK])dnl
 AC_REQUIRE([AC_PROG_MAKE_SET])dnl
 AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+	      		     [_AM_PROG_TAR([v7])])])
 _AM_IF_OPTION([no-dependencies],,
 [AC_PROVIDE_IFELSE([AC_PROG_CC],
                   [_AM_DEPENDENCIES(CC)],
@@ -753,13 +754,21 @@
 # this.)
 AC_DEFUN([AM_PROG_MKDIR_P],
 [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
-  # Keeping the `.' argument allows $(mkdir_p) to be used without
-  # argument.  Indeed, we sometimes output rules like
+  # We used to keeping the `.' as first argument, in order to
+  # allow $(mkdir_p) to be used without argument.  As in
   #   $(mkdir_p) $(somedir)
-  # where $(somedir) is conditionally defined.
-  # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more
-  # expensive solution, as it forces Make to start a sub-shell.)
-  mkdir_p='mkdir -p -- .'
+  # where $(somedir) is conditionally defined.  However this is wrong
+  # for two reasons:
+  #  1. if the package is installed by a user who cannot write `.'
+  #     make install will fail,
+  #  2. the above comment should most certainly read
+  #     $(mkdir_p) $(DESTDIR)$(somedir)
+  #     so it does not work when $(somedir) is undefined and
+  #     $(DESTDIR) is not.
+  #  To support the latter case, we have to write
+  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
+  #  so the `.' trick is pointless.
+  mkdir_p='mkdir -p --'
 else
   # On NextStep and OpenStep, the `mkdir' command does not
   # recognize any option.  It will interpret all options as
@@ -925,3 +934,111 @@
 INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
 AC_SUBST([INSTALL_STRIP_PROGRAM])])
 
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004  Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 1
+
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+

--- a/depcomp	Tue Nov 09 22:03:55 2004 +1100
+++ b/depcomp	Tue Nov 09 22:35:58 2004 +1100
@@ -1,9 +1,9 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2003-11-08.23
+scriptversion=2004-05-31.23
 
-# Copyright (C) 1999, 2000, 2003 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -43,6 +43,7 @@
   depmode     Dependency tracking mode.
   source      Source file read by `PROGRAMS ARGS'.
   object      Object file output by `PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
   depfile     Dependency file to output.
   tmpdepfile  Temporary file to use when outputing dependencies.
   libtool     Whether libtool is used (yes/no).
@@ -61,18 +62,10 @@
   echo "depcomp: Variables source, object and depmode must be set" 1>&2
   exit 1
 fi
-# `libtool' can also be set to `yes' or `no'.
 
-if test -z "$depfile"; then
-   base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
-   dir=`echo "$object" | sed 's,/.*$,/,'`
-   if test "$dir" = "$object"; then
-      dir=
-   fi
-   # FIXME: should be _deps on DOS.
-   depfile="$dir.deps/$base"
-fi
-
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
 tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
 
 rm -f "$tmpdepfile"
@@ -294,26 +287,35 @@
    base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
 
    if test "$libtool" = yes; then
+      # Dependencies are output in .lo.d with libtool 1.4.
+      # With libtool 1.5 they are output both in $dir.libs/$base.o.d
+      # and in $dir.libs/$base.o.d and $dir$base.o.d.  We process the
+      # latter, because the former will be cleaned when $dir.libs is
+      # erased.
       tmpdepfile1="$dir.libs/$base.lo.d"
-      tmpdepfile2="$dir.libs/$base.d"
+      tmpdepfile2="$dir$base.o.d"
+      tmpdepfile3="$dir.libs/$base.d"
       "$@" -Wc,-MD
    else
       tmpdepfile1="$dir$base.o.d"
       tmpdepfile2="$dir$base.d"
+      tmpdepfile3="$dir$base.d"
       "$@" -MD
    fi
 
    stat=$?
    if test $stat -eq 0; then :
    else
-      rm -f "$tmpdepfile1" "$tmpdepfile2"
+      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
       exit $stat
    fi
 
    if test -f "$tmpdepfile1"; then
       tmpdepfile="$tmpdepfile1"
+   elif test -f "$tmpdepfile2"; then
+      tmpdepfile="$tmpdepfile2"
    else
-      tmpdepfile="$tmpdepfile2"
+      tmpdepfile="$tmpdepfile3"
    fi
    if test -f "$tmpdepfile"; then
       sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"

--- a/install-sh	Tue Nov 09 22:03:55 2004 +1100
+++ b/install-sh	Tue Nov 09 22:35:58 2004 +1100
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2004-02-15.20
+scriptversion=2004-07-05.00
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -58,9 +58,6 @@
 rmprog="${RMPROG-rm}"
 mkdirprog="${MKDIRPROG-mkdir}"
 
-transformbasename=
-transform_arg=
-instcmd="$mvprog"
 chmodcmd="$chmodprog 0755"
 chowncmd=
 chgrpcmd=
@@ -70,23 +67,27 @@
 src=
 dst=
 dir_arg=
+dstarg=
+no_target_directory=
 
-usage="Usage: $0 [OPTION]... SRCFILE DSTFILE
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
    or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 -d DIRECTORIES...
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
 
-In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default.
-In the second, create the directory path DIR.
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
 
 Options:
--b=TRANSFORMBASENAME
--c         copy source (using $cpprog) instead of moving (using $mvprog).
+-c         (ignored)
 -d         create directories instead of installing files.
--g GROUP   $chgrp installed files to GROUP.
--m MODE    $chmod installed files to MODE.
--o USER    $chown installed files to USER.
--s         strip installed files (using $stripprog).
--t=TRANSFORM
+-g GROUP   $chgrpprog installed files to GROUP.
+-m MODE    $chmodprog installed files to MODE.
+-o USER    $chownprog installed files to USER.
+-s         $stripprog installed files.
+-t DIRECTORY  install into DIRECTORY.
+-T         report an error if DSTFILE is a directory.
 --help     display this help and exit.
 --version  display version info and exit.
 
@@ -96,12 +97,7 @@
 
 while test -n "$1"; do
   case $1 in
-    -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-        shift
-        continue;;
-
-    -c) instcmd=$cpprog
-        shift
+    -c) shift
         continue;;
 
     -d) dir_arg=true
@@ -129,14 +125,20 @@
         shift
         continue;;
 
-    -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+    -t) dstarg=$2
+	shift
+	shift
+	continue;;
+
+    -T) no_target_directory=true
         shift
         continue;;
 
     --version) echo "$0 $scriptversion"; exit 0;;
 
     *)  # When -d is used, all remaining arguments are directories to create.
-	test -n "$dir_arg" && break
+	# When -t is used, the destination is already specified.
+	test -n "$dir_arg$dstarg" && break
         # Otherwise, the last argument is the destination.  Remove it from $@.
 	for arg
 	do
@@ -174,13 +176,13 @@
     src=
 
     if test -d "$dst"; then
-      instcmd=:
+      mkdircmd=:
       chmodcmd=
     else
-      instcmd=$mkdirprog
+      mkdircmd=$mkdirprog
     fi
   else
-    # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
     # might cause directories to be created, which would be especially bad
     # if $src (and thus $dsttmp) contains '*'.
     if test ! -f "$src" && test ! -d "$src"; then
@@ -202,6 +204,10 @@
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
     if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dstarg: Is a directory" >&2
+	exit 1
+      fi
       dst=$dst/`basename "$src"`
     fi
   fi
@@ -229,34 +235,25 @@
       pathcomp=$pathcomp$1
       shift
       if test ! -d "$pathcomp"; then
-        $mkdirprog "$pathcomp" || lasterr=$?
+        $mkdirprog "$pathcomp"
 	# mkdir can fail with a `File exist' error in case several
 	# install-sh are creating the directory concurrently.  This
 	# is OK.
-	test ! -d "$pathcomp" && { (exit ${lasterr-1}); exit; }
+	test -d "$pathcomp" || exit
       fi
       pathcomp=$pathcomp/
     done
   fi
 
   if test -n "$dir_arg"; then
-    $doit $instcmd "$dst" \
+    $doit $mkdircmd "$dst" \
       && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
       && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
       && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
       && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
 
   else
-    # If we're going to rename the final executable, determine the name now.
-    if test -z "$transformarg"; then
       dstfile=`basename "$dst"`
-    else
-      dstfile=`basename "$dst" $transformbasename \
-               | sed $transformarg`$transformbasename
-    fi
-
-    # don't allow the sed command to completely eliminate the filename.
-    test -z "$dstfile" && dstfile=`basename "$dst"`
 
     # Make a couple of temp file names in the proper directory.
     dsttmp=$dstdir/_inst.$$_
@@ -266,25 +263,32 @@
     trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
     trap '(exit $?); exit' 1 2 13 15
 
-    # Move or copy the file name to the temp name
-    $doit $instcmd "$src" "$dsttmp" &&
+    # Copy the file name to the temp name.
+    $doit $cpprog "$src" "$dsttmp" &&
 
     # and set any options; do chmod last to preserve setuid bits.
     #
     # If any of these fail, we abort the whole thing.  If we want to
     # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $instcmd $src $dsttmp" command.
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
     #
     { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
       && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
       && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
       && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
 
-    # Now remove or move aside any old file at destination location.  We
-    # try this two ways since rm can't unlink itself on some systems and
-    # the destination file might be busy for other reasons.  In this case,
-    # the final cleanup might fail but the new file should still install
-    # successfully.
+    # Now rename the file to the real destination.
+    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+      || {
+	   # The rename failed, perhaps because mv can't rename something else
+	   # to itself, or perhaps because mv is so ancient that it does not
+	   # support -f.
+
+	   # Now remove or move aside any old file at destination location.
+	   # We try this two ways since rm can't unlink itself on some
+	   # systems and the destination file might be busy for other
+	   # reasons.  In this case, the final cleanup might fail but the new
+	   # file should still install successfully.
     {
       if test -f "$dstdir/$dstfile"; then
         $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
@@ -300,6 +304,8 @@
 
     # Now rename the file to the real destination.
     $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+	 }
+    }
   fi || { (exit 1); exit; }
 done